fbpx
GET A QUOTE NOW

Single Phase Inverter

SOLAR EDGE POWER INVERTER

The SolarEdge DC-AC PV inverter is specifically designed to work with the SolarEdge power optimizers. Because MPPT and voltage management are handled separately for each module by the power optimizer, the inverter is only responsible for DC to AC inversion.

Consequently, it is a less complicated, more cost effective, more reliable solar inverter with a standard 12 year warranty, extendable to 20 or 25 years. The fixed string voltage ensures operation at the highest efficiency at all times (>97% weighted efficiency) independent of string length and temperature.

 

Technical Data
 
 
 

sE2200

sE3000

sE3500

sE4000

sE5000

sE6000

 

OUTPUT

Rated AC Power Output

2200

3000

3500

4000

5000*

6000

VA

Maximum AC Power Output

2200

3000

3500

4000

5000*

6000

VA

AC Output Voltage (Nominal)

220 /230

Vac

AC Output Voltage Range

184 – 264.5

Vac

AC Frequency (Nominal)

50 / 60 ± 5

Hz

Maximum Continuous Output Current

12

16.5**

19.5**

22**

27

27

A

Residual Current Detector / Residual Current Step Detector

300 / 30

mA

Utility Monitoring, Islanding Protection, Country Con gurable Thresholds

Yes

 

INPUT

Recommended Maximum DC Power*** (Module STC)

2400

3300

3900

4400

5500

6600

W

Transformer-less, Ungrounded

Yes

 

Maximum Input Voltage

500

Vdc

Nominal DC Input Voltage

350

Vdc

Maximum Input Current

8.5

11.5

13.5

15.5

19.5

23

Adc

Reverse-Polarity Protection

Yes

 

Ground-Fault Isola on Detection

600kΩ Sensi vity

 

Maximum Inverter Effciency

97.6

%

European Weighted Effciency

97.6

97.6

97.5

97.5

97.4

97.4

%

Night time Power Consumption

< 2.5

W

ADDITIONAL FEATURES

Supported Communication on Interfaces

RS485, RS232, Ethernet, Zigbee (optional)

 

STANDARD COMPLIANCE

Safety

IEC-62103 (EN50178), IEC-62109

 

Grid Connection on Standards

VDE 0126-1-1, VDE-AR-N-4105, AS-4777, RD-1663 , DK 5940

 

Emissions

IEC61000-6-2, IEC61000-6-3, IEC61000-3-11, IEC61000-3-12, FCC part15 class B

 

RoHS

Yes

 

INSTALLATION SPECS

AC Output

Cable Gland – diameter 9-16

mm

DC Input

1 MC4 pair

2 MC4 pairs

 

Dimensions (HxWxD)

540 x 315 x 172

540 x 315 x 191

mm

Weight

20.2

21.7

kg

Cooling

Natural Convec on

 

Noise

< 50

dBA

Operating Temperature Range

-20 – +50 (M40 version -40 – +50)

̊C

Protection on Rating

IP65 – Outdoor and Indoor

 

Bracket Mounted (Bracket Provided)

EMS is an Energy Solutions company focused on delivering quality, innovative and real solutions which satisfy the growing demands for reduced energy consumption in commerce and industry in the island of Malta and Gozo.

Facebook-f

our products

Other Services

Contact Us

Aftersales & Support

Our address

  • No. 8, Dun Karm Street,
    Birkirkara,  BKR 9030, Malta
  • Email: [email protected]
  • Phone: +356 27555597
REC N-Peak
When looking to go solar, one challenge might be how to achieve the most from the space available for the installation. With the REC N-Peak Series, that’s how. These panels enable you to pack in maximum power into a limited space and achieve higher power levels with fewer panels.
REC’S MOST POWERFUL SOLAR PANEL EVER!
With up to 330 Wp in a 60-cell panel, the REC N-Peak Series uses the most efficient cell technology in the industry, capturing more sunlight thereby providing more power. The panel features the innovative REC ‘Twin’ cell layout design, where the panel is split into two twin sections, also enabling continued energy production, even when partially shaded.
ZERO LID:
The loss of power generation capacity experienced by a standard solar panel on its first exposure to light is known as Light Induced Degradation (LID). This is a result of the combination of boron and oxygen inside a cell and causes a permanent drop in a standard panel’s maximum power. Not with the REC N-Peak Series, however! The n-type technology in REC’s N-Peak cells stops these two elements from mixing at any level, thereby fully preventing any occurrence of LID. Thus, the panel’s power remains the same as when it left the REC factory – meaning you always get exactly the power levels that you paid for.
SUPER-STRONG FRAME DESIGN:
The REC N-Peak Series has extra support bars across the rear of the panel, greatly boosting its strength and durability, and allowing loads of up to 7000 Pa – far exceeding the 5400 offered by conventional panels. This added strength enables you to achieve much higher energy yields. Combined with a 30 mm frame height, this frame design enables flexible installation options, making overcoming every obstacle easier during system design.
Variants
REC N-Peak panels come standard with black-colored half-cut monocrystalline cells and a black frame to give you the ideal combination of high power and aesthetics: REC N-Peak Series (310-330 Wp)
Warranty
All of the advantages of the REC N-Peak Series combine to guarantee customers high power output over its warranted lifetime. The REC N-Peak series comes with REC’s best warranty:
25 YEAR LINEAR POWER OUTPUT WARRANTY WITH 0.5% WARRANTED ANNUAL DEGRADATION
Ensures that your REC solar panels perform exactly as they’re expected to – every year for 25 years. With 0.5% warranted annual degradation, your REC N-Peak panel will still produce at least 86% of its nameplate power in its 25th year of operation – the highest of any REC panel.